District Double Clamp

This new District clamp is made from anodized Aluminum. Fits both aftermarket Chromoly (1 1/4 "OD) and Aluminum (1 3/8" OD) bars. Does not fit stock Razor Pro bars. Comes with shim and sticker.

Weight: 2 ounces.

How to install the clamp: Loosen both bolts with a 5mm allen wrench (sold separately). Place the clamp around the bottom of your bar. If you have a steel bar, you will need the shim. Slide the bar over the fork steerer tube till it hits the top of the headset. Thighten the bolts with a 5mm allen wrench. If you have inverted compression with a starnut inside your bar, tighten the compression before tightening the 2 bolts on the clamp.